Gas stove ignition valves
Brass and aluminum valve platforms for overseas gas-cooker projects, with shaft, port, ignition and safety interfaces confirmed against the appliance.
Gas appliance components · precision metalwork
Control components built around the fuel system.
Brass and aluminum gas-stove valves, ignition-valve assemblies and custom-machined fuel-delivery components—developed from the appliance interface, not selected by appearance alone.
MATERIAL 01BRASS
Machined valve bodies, ports, threads, sealing surfaces and precision fittings.
MATERIAL 02ALUMINUM
Lower-weight valve bodies and custom-machined flow-control components.
SCOPEOEM
Drawing-based, sample-based and appliance-interface development.
Direct answer
What does Joelwave supply?
Joelwave supplies aluminium and brass gas-control valves and ignition components for household and commercial gas appliances. Valve selection is based on gas type, inlet pressure, mounting dimensions, shaft structure, outlet configuration, burner arrangement and ignition requirements.
Compatibility should be confirmed using drawings, samples or appliance installation data rather than appearance alone. Buyers can start with the SA-032AG aluminium piezo ignition valve, the KB5 brass wok-burner valve, or send an existing component for an OEM interface review.
Featured valve · SA-032AG
45° pilot connection. Built for wok stoves.
An angled pilot-tube outlet helps clear the stove cover without a clearance bend. Fully automated machining, assembly and testing. 100–250 kPa · 230 g.
Explore SA-032AG ↗
Verified model comparison
SA-032AG or KB5?
These are different valve platforms. Use the confirmed data below as a starting point, then verify the final connections, mounting and burner interface before ordering.
| Selection point | SA-032AG | KB5 |
|---|---|---|
| Application | Medium-pressure, high-output wok stoves | Medium-pressure, high-output wok stoves |
| Function | Gas flow, flame adjustment and piezo ignition | Gas flow and flame adjustment |
| Usual operating inlet pressure | 100–250 kPa | ≥100 kPa |
| Ignition | Yes · piezo ignition | No |
| Flame-failure protection | To be confirmed for the specific configuration | No |
| Known features | 45° pilot-tube connection | LPG · hose-barb inlet for a rubber gas hose |
| Confirmed testing | Test conditions to be confirmed for the quoted configuration | Every set leak-tested at 250 kPa for 15 seconds |
| Minimum order quantity | To be confirmed with quotation | 500 sets |
The 250 kPa value shown for KB5 is its factory leak-test pressure, not its rated operating pressure. Unconfirmed fields are intentionally identified for project review.
Component families
Start with the valve. Expand into the complete flow path.
Precision valve bodies
CNC-turned and multi-operation brass or aluminum bodies for customers who provide a drawing, sample or required installation interface.
Fuel-delivery components
Tubes, nozzles, connectors, manifolds and machined flow components for gas, ethanol, vegetable-oil and other fuel-appliance development.
Matched OEM assemblies
Valve bodies can be evaluated together with switches, shafts, fittings, tubes and the target burner system instead of as an isolated catalogue part.
Aluminum valve catalog
Explore ignition valves and matched tubing.
Browse reference configurations, identify a suitable starting point and send the code with your drawing or sample.
View the valve catalog ↗
Brass wok burner valves
KB5, KB8 and 7B for commercial wok stoves.
Explore brass valve assemblies for medium-pressure, high-output burners. Compare product views and request a configuration matched to your stove.
Explore brass valves ↗
Manufacturing advantage
Automation matters when every port and sealing surface must repeat.
Material preparation
Confirm alloy, incoming form and the component characteristics that must be controlled.
Automated machining
Coordinate turning, drilling, threading, port creation and repeatable multi-operation production.
Critical inspection
Define dimensions, threads, ports, sealing surfaces and the records required for the order.
Assembly & testing
Agree component assembly, leakage or flow checks and batch evidence before volume production.
Factory footage
See the machining, assembly and testing.
Real footage from our manufacturing partner shows automated machining, operator-assisted assembly and dedicated test equipment. The clips show different processes and do not imply that every model uses the same production route.
Machining
Automatic plug-component milling
Automated milling of plug components used in aluminum gas valves.
Workshop
Inside the assembly workshop
A factory-floor view of the assembly area and workstation layout.
Assembly
Operator-assisted valve assembly
Close-up footage of components being assembled by an operator using powered tools.
Leak testing · 8 kPa / 10 s
Automatic aluminum-valve leak testing
The aluminum-valve test shown uses 8 kPa for 10 seconds. These are test conditions for this process, not a working-pressure rating or a specification for every valve model.
Ignition endurance
Automatic ignition endurance testing
Repeated operation of ignition-valve mechanisms to count successful ignition events. Model-specific cycle targets and results are confirmed separately.
Packing & dispatch
Cartons reinforced with wooden frames.
Valve shipments use cartons with external wooden reinforcement to help protect heavy, precision components against handling impacts and compression. Packing quantities, dimensions and weights are confirmed for each order.
OEM project case
Matching direct inner-ring ignition for a tabletop stove.
A Vietnamese manufacturer's project: electrode positioning, protected ignition leads, sample discharge checks and production feedback.
Read the illustrated project case →Information required before quotation
Send the system requirements before asking for the final price.
A similar-looking valve can have a different shaft, gas path, ignition interface, pressure range or sealing system. The following information helps us determine whether an existing platform can be matched or a custom part is required.
- 01 · Gas type
- Specify LPG, natural gas or another fuel.
- 02 · Actual inlet pressure
- Provide the pressure used by the appliance.
- 03 · Existing valve photos
- Include clear views of all sides and connection points.
- 04 · Mounting-hole spacing
- Provide centre-to-centre dimensions and mounting details.
- 05 · Shaft
- Confirm shaft dimensions and rotation angle.
- 06 · Connections
- Identify the inlet and outlet connection types and sizes.
- 07 · Main-jet diameter
- State the confirmed nozzle-orifice diameter.
- 08 · Burner arrangement
- Show the burner, nozzle positions and gas-flow layout.
- 09 · Ignition method
- Confirm piezo, pulse ignition or another method.
- 10 · Pilot flame
- State whether a pilot flame is required.
- 11 · Flame-failure protection
- State whether a flame-failure protection interface is required.
- 12 · Estimated annual quantity
- Provide the expected annual demand and initial order quantity.
Engineering boundary
Machining capability does not make one component universal.
Material compatibility, pressure, temperature, sealing system, fuel composition, appliance interface, testing method and destination-market compliance must be reviewed for every application. Joelwave does not describe an unverified component as suitable for all gases, fuels or appliances.
Buyer questions
What to confirm before requesting a sample.
Which information is required to match a gas stove valve?
Please provide the fuel or gas family, inlet pressure, inlet and outlet interfaces, shaft dimensions, mounting arrangement, ignition-switch requirement, flame-failure interface, target appliance, annual volume and destination market. A drawing or physical sample is strongly preferred.
Are both brass and aluminum valve bodies available?
Yes. The manufacturing platform supports brass and aluminum machining. Material selection must be confirmed against the fuel, pressure, temperature, corrosion environment, sealing system, target cost and applicable requirements.
Can you copy an existing valve from a sample?
A sample can be used for initial dimensional and interface evaluation. The customer should also confirm ownership or authorization for any protected design. Critical dimensions, materials, sealing surfaces and acceptance tests are agreed before tooling or pilot production.
Can the factory manufacture parts outside gas cookers?
Yes. The same machining capability may support valve bodies, connectors, nozzles, manifolds and delivery tubes for other fuel-burning or fluid-control equipment. Suitability is evaluated project by project rather than claimed as universal.
What quality evidence can be agreed for an order?
Depending on the component, the order can define incoming-material records, dimensional inspection, thread and port checks, sealing-surface inspection, leakage or flow testing, assembly checks and batch traceability. The exact method and acceptance criteria must be confirmed before production.
Are prices shown online?
No. Pricing depends on material, dimensions, machining operations, tolerances, purchased components, testing, tooling, packaging and volume. Joelwave prepares a confidential quotation after the technical scope is reviewed.
Start a component review
Send a drawing, sample photo or appliance interface.
Include the medium, pressure, material preference, critical dimensions, testing requirement, destination market and expected annual quantity. We will identify the missing technical questions before quotation.